Use MPR(X) based parts

 

Routing / Nesting system parameter to set for MPR(X) parts

 

mct2100-01.gif

 

For Nesting optimising where part lists contain parts based on the MPR(X) file format this value must be set. This allows nested patterns to be correctly created.

 

- Check the box if MPR(X) parts are used

 

tickbox9.gif Use MPR(X) based parts

 

This setting forces the program to use the WoodWop 'Project manager' software. This software must be installed when using Nesting optimising with MPR(X) based parts.

 

 

Notes

 

- The system parameter: Use Project manager must also be checked if this parameter is checked.

 

 

See also